NEW: Pictures of the "Sigelei-K" aka Kick Clone

...its Sigelei

Finally real pics of the Kick by Sigelei.  They are humbly calling it "The Sigelei-K".  Vendor prices on these vary, but $15.00-$25.00 will be the average price.   These are supposed to function exactly like the Kick by Evolv - for a fraction of the cost.   The only thing I see missing is the plastic shrink wrap, and the Evolv logo.

ROLLOUT & BLOWOUT: Sigelei Kick Clone Preorder - $15.00

...its Whitestagvapor

THIS DEAL ENDS IN A FEW HOURS

Here is a CRAZY DEAL on the KICK clone by Sigelei.  I was in a Google hangout with the owner and he assured me these are real, live, and ready to roll.

THE HARD COPY:

Product Description

Sigelei Kick Clone - This is NOT the Kick by evolv

Hot selling sigelei new kick for telescope mod to adjust the voltage

THIS IS A PRE-ORDER SALE (10 days out)

The Kick is Boosted Power Regulation in the form of a drop in module designed to be used in various tube devices with IMR batteries. Foremost, the Kick is designed to be used in 18650 sized metal tube devices (max 19.5 mm internal diameter) using an 18490 or 18500 IMR battery. It can also be used in 18500 sized tube devices (max 19.5 mm internal diameter) with an IMR 18350 battery.
Unlike variable voltage, the Kick’s Power Regulation microprocessor will automatically, and constantly, adjust both the volts and amps levels (as needed) to provide consistent watts (vaping heat) output. The Kick, once users finds their preferred watts output, is more of a set it and forget it design. This is because the Kick will boost and regulate the power to provide the same watts output consistently from first activation to the last regardless of the atty/carto resistance.

WHERE: http://www.whitestagvapor.com/

WOW: Smoktech Natural - RSST - and a Kick - $97.88

...its Exhalevapors

You can kiss me later for this deal!   Your getting a Stainless Smoktech Natural,  a RSST RBA Tank, and a Kick.  For under $97.88 - this deal is off the hook!



THE HARD COPY:

The first generation of The Natural had a conical sloped top and was ill-received. SMOKtech redesigned the top to make it a much more attractive flat top with dimples in the stainless steel cap. This cap unscrews from the rest of the mod independently and has a center pin than can be loosened or tightened by a wide flat 'screw'.

At the bottom of the mod you will see a generous ring of 12 vent holes done very tastefully as you can see in the pictures. Interestingly, the Natural has a flat-head, wide base which you can screw in and out to accommodate batteries that may be slightly longer. However, most importantly, it is adjustable to fit a KICK or the upcoming Chinese made STOMP. This base also has its own internal ring of vent holes, parallel to the vent holes on the bottom of the mod.

Introducing the Natural by SMOKtech!

1. Well made with high quality stainless steel material.  Gives a very solid feel.
2. Fully mechanical Switch, no wire soldering,no soldiering tin ,works perfectly with "The kick"
3. Side bottom fire button, you can press it with any of your finger comfortably
4. All parts are detachable, even the battery connection part.
5. Ego and 510 thread, compatible with all kinds of ego or 510 cartos and tanks.
6. 12 venting holes on bottom ,allows the maximum airflow
7. Each set comes with 1 complete mod which uses 1 18350 battery as well as an extention tube for 1 18650 battery.



WHERE: https://www.exhalevapors.com/


THE DEAL:Use coupon code VaporJoes11Percent to bring the total dow to $97.88

ROLLOUT: SIGELEI CLONING THE KICK?

...its Sigelei

It seems Sigelei is busy cloning the Kick.   At this point its obvious they are just using the stock picture from Evolvs website - but it is in the works.   The vendor cost on these are going to be $6-$10.00 - so if this clone goes live - your looking at $20.00 kicks clones.


WHERE:  http://www.alibaba.com/

LOW: The KICK by Evolv - $38.99

...its Exhalevapors

Here is the lowest deal on the kick going.  If your in the market for a kick - here is where you should pick one up.


THE HARD COPY:

The Kick from Evolv is Boosted Power Regulation in the form of a drop in module designed to be used in various tube devices with IMR batteries. Foremost, the Kick is designed to be used in 18650 sized metal tube devices (max 19.5 mm internal diameter) using an 18490 or 18500 IMR battery. It can also be used in 18500 sized tube devices (max 19.5 mm internal diameter) with an IMR 18350 battery. Some device manufacturers are looking into making extensions, or longer versions of their devices, to permit the Kick to be used with an 18650 IMR battery.  



WHERE: https://www.exhalevapors.com/

THE DEAL:

Use coupon code VaporJoes11Percent to bring the total down to $38.99

THE KICK - 46.99 Free shipping

...its vaporbeast

Lots of talk of the kick lately.  For some reason I have been getting a lot of people asking the best place to buy one.  Well here it is.   The fact its a little cheaper then most plus it ships free makes it the best deal on the kick I can find.  So if your looking for a kick - here is your vendor.


WHERE:  http://www.vaporbeast.com


$46.99 free shipping

The CAN from Nhaler - NOW LIVE!

....Its Nhaler

(The can on "the curve" mod)

So why did I buy it?  To me its superior to the Kick in many ways.  

The Kick - 10 Watts

The Can -  12 Watts

The Kick - Small and fragile

The Can - Far better construction (aluminum or Stainless)

The Kick - Must disassemble the mod to change the wattage

The Can - Can change the wattage at will

The Kick - Can only work on certain mods unless you buy a Kicklet (another 70 bucks)

The Can - Works on any 3.7v 510 mod that an 18490 battery or higher  

The only disadvantage is the size increase - but im partial to bigger mods.




THE HARD COPY:

Introducing the “Can” available exclusively from Nhaler!

Nhaler is very excited to announce a new and one-of-a-kind device.
The “Can” is a Power Regulated add-on for most any 18490 or larger single battery device. The “Can” is powered by Evolv and is capable or providing 6 to 12 Watts of consistent vaping pleasure. Power output is limited with smaller batteries.

Simply stated, the “Can” uses standard 510 connections and connects on top of your device just like a carto tank. Your atty, carto or tank connects just as easily on top of the “Can”. The Can has an external potentiometer knob for easy on-the-fly adjustment to your preferred watts level – or adjust to taste. We LISTENED to the valuable feedback of our prototype testers and changed the external potentiometer knob to BRASS – looks AWESOME!

So, to answer the question many of you have been asking, we are offering Introductory Pricing to launch this exciting new device attachment:

Stainless Steel “Can” Regular Price $90.00, limited time Introduction price $80.00 and remember to use your “SAVE5” code at checkout for an additional discount! Get YOUR Stainless Steel “Can” for the Introductory price: $76

Aluminum “Can” Regular Price $80, limited time Introduction price $70 and remember to use your “SAVE5” code at checkout for an additional discount! Get YOUR aluminum “Can” for the Introductory price: $66.50

As always, all orders over $70 qualify for free 1st class shipping and you can upgrade to priority and even Express shipping.
  

WHERE:  http://shop.nhaler.com/

Use coupon code save5 to bring the cost down to $66.50 for the Aluminum model 


THE THREAD ON ECF: http://www.e-cigarette-forum.com


 

ROLLOUT: The Can from Nhaler!

....Its Nhaler

Turn any standard 3.7v mod into a variable wattage without worrying if a kick will fit. 

THE HARD COPY:

Introducing the “Can” available exclusively from Nhaler!

Nhaler is very excited to announce a new and one-of-a-kind device.
The “Can” is a Power Regulated add-on for most any 18490 or larger single battery device. The “Can” is powered by Evolv and is capable or providing 6 to 12 Watts of consistent vaping pleasure. Power output is limited with smaller batteries.

Simply stated, the “Can” uses standard 510 connections and connects on top of your device just like a carto tank. Your atty, carto or tank connects just as easily on top of the “Can”. The Can has an external potentiometer knob for easy on-the-fly adjustment to your preferred watts level – or adjust to taste. We LISTENED to the valuable feedback of our prototype testers and changed the external potentiometer knob to BRASS – looks AWESOME!

So, to answer the question many of you have been asking, we are offering Introductory Pricing to launch this exciting new device attachment:

Stainless Steel “Can” Regular Price $90.00, limited time Introduction price $80.00 and remember to use your “SAVE5” code at checkout for an additional discount! Get YOUR Stainless Steel “Can” for the Introductory price: $76

Aluminum “Can” Regular Price $80, limited time Introduction price $70 and remember to use your “SAVE5” code at checkout for an additional discount! Get YOUR aluminum “Can” for the Introductory price: $66.50

As always, all orders over $70 qualify for free 1st class shipping and you can upgrade to priority and even Express shipping.
  

THE ECF THREAD:
http://www.e-cigarette-forum.com/